|
Our NEW Programmable RFID Door Lock Set With Electromagnetic Lock and LCD!
$
330.00
Click here for more info
Our prices now include taxes and shipping costs (Post). If you wish to purchase several items, please send a message through our contact page. You'll speak to a real person, and we can offer you a single shipping price will lower your overall costs, and save you money! Responses will be prompt! |
|
Our NEW Programmable RFID Door Lock Set With Electromagnetic Lock and LCD!
This listing is for a complete RFID door lock set that includes an RFID reader, LCD control module, RFID cards, elecromagnetic lock with bracket and mounting hardware, a USB connector cable, and a 12v 2A AC-DC wall adaptor. the above video acts as the user manual. You can conrol either the included electromagnetic lock, or external AC or DC devices through the on board relay output terminal block.
Everything comes fully assembled and tested. You will need to make the USB connections between the LCD controller board, and the RFID reader board. Also, the electromagnetic lock will not be connected upon delivery, as you have the option of implementing the electromagnetic lock, or an external device to be controlled by the relay outputs. You have the option. This will be explained more below.
The Complete Shipping List:
1x RFID reader board with antenna encased in a project box
1x USB connector cable
1x Electromagnetic lock with bracket and mounting hareware
1x LCD Controller Board
2x Small circular 125khz RFID tags with adhesive strip
2x Large white 125khz RFID cards
1x 12v 2A AC-DC wall adapter
Can I Control Something Other Than The Included Electromagnetic Lock???
You bet you can! The explanation for this is detailed in the above video, which we hope that you've already watched in full. You have the option of using the included electromagnetic lock, OR you can control other AC or DC devices by implementing the relay output terminal block.
Using the electromagnetic lock: As seen in the video above, there are two headers that need to be jumped in order to use the electromagnetic lock terminal. Make sure that these jumpers are only connected when using the electromagnetic lock. Place the two jumpers on the two "EN" headers, and connect the red wire of the lock to the "RED" terminal. Connect the black wire of the electromagnetic lock to the "BLK" terminal. If you do this, then the lock will be magnetised on power up. Power will be removed from the lock when the correct combination is entered.
Using the relay output terminal block: If you do not wish to use the electromagnetic lock, and would rather control something else, then you ABSOLUTELY need to remove the two "EN" jumpers. This is talked about in the above video. Once you've done that, you can use the relay as a simple ON/OFF switch. The relay terminal has three terminals labelled:
NC: Normally Closed
CO: Common
NO: Normally Open
When the relay is off, the CO terminal is connected to the NC terminal. When the relay turns on (After a correct combination has been entered), the CO terminal disconnects from the NC terminal, and connects to the NO terminal. When the relay turns off again, the CO terminal disconnects from the NO terminal, and reconnects back to the NC terminal. It is a simple ON /OFF switch. If you need more information, or require help or assistance with this, drop us a line through our contact page. We'll happily be of service!
If you have any questions at all, please do not hesitate to send us a message through our contact page. We will get back to you promptly with solid answers to your questions. Thank you for taking an interest in our wares!
Everything comes fully assembled and tested. You will need to make the USB connections between the LCD controller board, and the RFID reader board. Also, the electromagnetic lock will not be connected upon delivery, as you have the option of implementing the electromagnetic lock, or an external device to be controlled by the relay outputs. You have the option. This will be explained more below.
The Complete Shipping List:
1x RFID reader board with antenna encased in a project box
1x USB connector cable
1x Electromagnetic lock with bracket and mounting hareware
1x LCD Controller Board
2x Small circular 125khz RFID tags with adhesive strip
2x Large white 125khz RFID cards
1x 12v 2A AC-DC wall adapter
Can I Control Something Other Than The Included Electromagnetic Lock???
You bet you can! The explanation for this is detailed in the above video, which we hope that you've already watched in full. You have the option of using the included electromagnetic lock, OR you can control other AC or DC devices by implementing the relay output terminal block.
Using the electromagnetic lock: As seen in the video above, there are two headers that need to be jumped in order to use the electromagnetic lock terminal. Make sure that these jumpers are only connected when using the electromagnetic lock. Place the two jumpers on the two "EN" headers, and connect the red wire of the lock to the "RED" terminal. Connect the black wire of the electromagnetic lock to the "BLK" terminal. If you do this, then the lock will be magnetised on power up. Power will be removed from the lock when the correct combination is entered.
Using the relay output terminal block: If you do not wish to use the electromagnetic lock, and would rather control something else, then you ABSOLUTELY need to remove the two "EN" jumpers. This is talked about in the above video. Once you've done that, you can use the relay as a simple ON/OFF switch. The relay terminal has three terminals labelled:
NC: Normally Closed
CO: Common
NO: Normally Open
When the relay is off, the CO terminal is connected to the NC terminal. When the relay turns on (After a correct combination has been entered), the CO terminal disconnects from the NC terminal, and connects to the NO terminal. When the relay turns off again, the CO terminal disconnects from the NO terminal, and reconnects back to the NC terminal. It is a simple ON /OFF switch. If you need more information, or require help or assistance with this, drop us a line through our contact page. We'll happily be of service!
If you have any questions at all, please do not hesitate to send us a message through our contact page. We will get back to you promptly with solid answers to your questions. Thank you for taking an interest in our wares!
